HBOTSALE
HARD MULTIPLACE SITTING HBOT
Sitting Hard Shell Hyperbaric Chamber
Model: HE5000-Mini
HE5000-Mini is a hard-shell sitting hyperbaric chamber listed for one or two people, with a maximum listed pressure of 2.0 ATA and 90%+ oxygen purity. The supplied page lists an 83 × 43 × 72 in envelope and an integrated package of chamber cabin, oxygen concentrators, enhanced air compressor and air conditioner. Confirm the delivered configuration before ordering.
- Listed Dimensions83 × 43 × 72 in
- Listed Pressure2.0 ATA adjustable
- Listed Capacity1-2 Personen
- Reinheit des Sauerstoffs90%+
- MOQ1 unit
- CustomizationColor and customization listed; confirm scope
Values are transcribed from the supplied product page. Confirm the delivered configuration and current documents before ordering.
PROCUREMENT DECISION MODULE
Procurement Fit Checklist
Screen the physical and operating fit before requesting a final quotation for this exact model.
- Confirm the delivered model is HE5000-Mini and reconcile the 83 × 43 × 72 in page value with the latest approved drawing.
- Confirm the one- or two-person sitting layout, entry clearance, seat arrangement and occupant envelope.
- Confirm floor loading, route clearance, power, ventilation, fire controls, communications and service access.
- Request current operating, interface, maintenance and inspection documents before approving the order.
COMPLETE SPECIFICATIONS
The Exact Data Buyers Need Before Ordering.
These values are transcribed from the supplied HE5000-Mini product page. Confirm the delivered configuration and current technical documents before approval.
| Produktname | Sitting Hard Shell Hyperbaric Chamber |
|---|---|
| Model / Part Number | HE5000-Mini |
| Product Category | Hard Multiplace Sitting Hyperbaric Oxygen Chamber |
| External Dimensions | 83 × 43 × 72 in (L × W × H) |
| Material Composition — Public Reference | Same-manufacturer HE5000-series reference: 4.0 mm 304 stainless-steel hull with a 10–15 mm PC door; confirm the exact HE5000-Mini revision. |
| Connection Interface — Public Reference | Same-manufacturer HE5000-series reference: around 230 L/min air delivery, 20 L/min oxygen output and order-selected 110/220/230/240 V supply; confirm the HE5000-Mini utility schedule. |
| Applicable Standards — Industry Reference | ASME PVHO-1 and NFPA 99 are industry references for human-occupancy hyperbaric equipment/facilities; this is not a HE5000-Mini certificate claim. |
| Maximum Listed Pressure | 2.0 ATA adjustable |
| Listed Capacity | 1-2 Personen |
| Listed Oxygen Purity | 90%+ |
| Marking / Traceability | Inspection records are stated to accompany each unit; confirm serial/batch traceability in delivery documents. |
| Package Scope | 1 chamber cabin + 2 all-in-one machines as listed; confirm export packing configuration. |
APPLICATIONS & EQUIPMENT
Where This Model Is Normally Used.
Review the model against the real site, occupant envelope and operating documentation before ordering.
Sitting Chamber Configuration
The supplied HE5000-Mini page describes a one- or two-person sitting configuration. Confirm the final seat arrangement and occupant envelope in the quotation.
Installation Planning
Use the listed 83 × 43 × 72 in envelope together with route, floor loading, power, ventilation and service-clearance checks to review a proposed installation.
OEM And Reseller Supply
Manufacturer service materials list OEM/ODM and brand-customization support; confirm the contractual scope, documents and configuration for this model.
PERFORMANCE & WORKING CONDITIONS
Define The Operating Window Clearly.
Only listed values are shown as specifications; operating settings, relief values and site limits require the current model documents.
CUSTOMIZATION
Adjust The Specification When The Standard Version Is Not Enough.
Customization is listed at manufacturer level; confirm the exact engineering and commercial boundary for HE5000-Mini.
- Cabin Color
Blue, Red, White, Gray and customized color are listed on the supplied product page. - Logo And OEM / ODM
Logo customization and OEM/ODM support are listed in manufacturer service materials; confirm scope for this model. - Reseller Documentation
Marketing-material and training support are listed for reseller programs; confirm deliverables and terms in the quotation.
USE & SAFETY INSTRUCTIONS
Use The Product Correctly From Installation To Maintenance.
The exact-model page lists door and pressure safeguards, alarms, internal/external controls and carbon-dioxide discharge. Follow the current HE5000-Mini instructions and site procedures; this public-source checklist is a procurement and safety gate, not a substitute for the approved manual.
Verify The Delivered Scope
Match the model, dimensions, package contents and visible condition against the quotation and current model documents.
- Verify HE5000-Mini marking and supplied accessories
- Check for transport damage or contamination
- Review the current approved drawing or manual
Prepare The Installation Area
Confirm route clearance, floor loading, power, ventilation, grounding, fire controls, communications and service access before setup.
- Confirm utilities and emergency access
- Keep the equipment area clear and dry
- Complete initial checks before operation
Operate With Trained Supervision
Use only approved pressure and oxygen settings, monitor occupants throughout operation and follow the current instructions for controls and emergency features.
- Confirm normal settings before pressurization
- Monitor alarms, pressure displays and occupants
- Stop and contact technical support for abnormal conditions
Clean And Maintain
Follow manufacturer cleaning and maintenance instructions; inspect doors, seals, valves, alarms and records at the required interval.
- Use only approved cleaning materials
- Record inspections and maintenance actions
- Confirm replacement parts and service method
PURCHASING CONDITIONS
Know What To Confirm After You Request A Quote.
The supplied product page confirms MOQ and provides page-level price, payment and shipping descriptions. Confirm all current commercial terms, configuration and destination scope in the quotation.
- MOQ1 unit
- Sample Policy — Public ReferenceSame-manufacturer hard-shell line accepts single-unit orders; confirm any sample-credit or evaluation policy
- Sample Lead TimeConfirm with quotation
- Bulk Lead Time — Public ReferenceSame-manufacturer hard-shell class lists 45–75 days for production runs; confirm the HE5000-Mini schedule
- Price BasisPage states price includes all machines and shipping; confirm currency, validity, incoterm and quotation basis
- Packaging Configuration — Public ReferenceSame-manufacturer hard-shell line describes rugged wooden-crate/protective packaging; confirm actual packout, dimensions, weight and marking
- Payment TermsPage lists T/T, Western Union, MoneyGram, Escrow and PayPal; confirm current milestones
- Shipping SupportPage describes door-to-door air/sea options and lists DHL, UPS, TNT and FedEx; confirm route, incoterm and carrier scope
PRE-SALES & AFTER-SALES SERVICE
Support From Specification Review To Repeat Supply.
Service statements below are manufacturer-level material and must be confirmed for the ordered HE5000-Mini configuration.
Before Ordering
Specification review and model recommendation are listed in manufacturer materials; confirm final configuration, utilities and quotation scope.
During Production
The supplied page lists assembly, aging, full testing, final inspection and packing inspection; request the current inspection record for the unit.
After Delivery
Training and after-sales support are listed in manufacturer materials; confirm installation guidance, service contact and response scope in the quotation.
REQUEST A TECHNICAL QUOTE
Tell Us The Equipment, Condition And Quantity.
- 0086-180-1702-3916
- rachel@macypan.com
- WhatsApp: 0086-180-1702-3916
- Bldg.15, No.899 Guinan Rd, Songjiang Dist, Shanghai, China 201617