buy a hyperbaric chamber

Choose the Chamber Format Around the User and the Room

Start with the intended use, operating environment, and target-market requirements. These determine which devices can enter the shortlist before price, appearance, or maximum pressure is compared.

Choose the pressure-bearing structure next. A foldable soft-sided chamber may reduce storage and handling demands, while a rigid chamber requires a defined delivery path, floor capacity, and permanent operating space. The words “portable,” “home,” and “hard-shell” describe format or sales positioning; the exact model documents determine permitted use, operating conditions, and supervision requirements.

Then match occupancy and posture to the user. A single-person chamber fits one-user operation. A two-person or larger chamber needs confirmed rated occupancy, interior layout, oxygen interfaces, staffing, and evacuation arrangements. Sitting, reclining, and lying formats should be selected around entry method, transfer needs, interior dimensions, and the operator’s ability to observe and communicate with the user.

Use these questions to narrow the format:

1. Will one person or more than one person enter the chamber?
2. Does the user need to sit, recline, lie down, walk in, or use assisted transfer?
3. Does the room have enough door width, turning clearance, floor capacity, ventilation, power, and service space?
4. What operating pressure, gas arrangement, supervision, and target-market documentation does the intended use require?

Build a Comparable Specification Before You Compare Quotes

A usable RFQ defines the same technical and delivery boundary for every supplier. Record each field below and mark missing information as “to be confirmed” instead of comparing assumptions.

A higher ATA value does not by itself establish better fit. Pressure must be evaluated with the chamber structure, intended use, gas system, instructions, and applicable operating requirements.

Compare Six MACY-PAN Hyperbaric Chamber Options

Use these six product links as a shortlist for different chamber formats and seating arrangements. Each dated quotation should identify the exact model and configuration being ordered; products shown without a model code need a model-matched data sheet before final comparison.

Portable Hyperbaric Chamber for Home Use

A horizontal soft-sided option for buyers prioritizing a lying position and a chamber body that is easier to store or move than a rigid shell. Confirm the complete system, room conditions, intended use, and supervision plan for the installation location.

• FormatHorizontal soft-sided chamber
• Listed size80 cm diameter × 225 cm length (about 31.5 × 88.6 in.)
• Listed pressure1.3 ATA
• Listed chamber materialPolyether-based TPU composite
• Listed featuresDual zipper and silicone sealing strip
• Listed oxygen-concentrator flow10 L/min
• Listed electrical input110/220 V

Quote This Portable ChamberView Product Details

Single Person Hyperbaric Chamber

A rigid single-person format for a buyer who wants one-user capacity, a large transparent enclosure, and an adjustable listed pressure range. Confirm the final pressure configuration and room access before ordering.

• FormatSingle-person hard-shell chamber
• Listed size85 cm diameter × 225 cm length (about 33.5 × 88.6 in.)
• Listed pressure range1.1–2.0 ATA, adjustable
• Listed shell and windowAluminum shell with PMMA viewing window
• Listed electrical input110/220 V

Quote This Single-Person ChamberView Product Details

2 Person Hyperbaric Chamber

A soft-sided two-person option for buyers who want shared capacity in one chamber. The specified product page identifies a TPU chamber measuring 90 cm in diameter and 225 cm in length, with a listed 1.3–1.5 ATA range and 10 L/min oxygen-concentrator flow.

• Listed capacityTwo people
• Structure and materialSoft-sided TPU chamber
• Listed size90 cm diameter × 225 cm length (about 35.4 × 88.6 in.)
• Listed pressure range1.3–1.5 ATA
• Listed oxygen-concentrator flow10 L/min
• Listed electrical input110/220 V
• Listed chamber weight18 kg (about 40 lb.)
• Listed total system weightApproximately 45 kg (about 99 lb.)

Image-to-page check: The supplied black reference image shows a rigid-looking chamber and does not match this soft-sided product record. Ask for corrected product photography or a corrected product link before using the image to select a configuration.

Confirm and Quote This Two-Person ChamberView Product Details

Sitting Hyperbaric Chamber

A vertical soft-sided chamber for buyers who prefer a seated position rather than lying horizontally. Its upright footprint and included folding chair make it a practical format to compare when floor length is limited.

• FormatVertical sitting chamber
• Listed pressure settings1.3, 1.4, or 1.5 ATA, adjustable
• Listed chamber size140 cm bottom diameter × 160 cm height (about 55.1 × 63 in.)
• Listed material and closureMedical-grade TPU with YKK dual-layer sealing zipper
• Listed air flow70–120 L/min
• Listed power consumption600 W
• Listed accessoriesFolding chair, oxygen headset, and mattress

Image-to-page check: The supplied metallic rigid-chamber image does not match the vertical TPU product record. Ask for corrected product photography or a corrected product link before using the image to select a configuration.

Request Sitting-Chamber SpecificationsView Product Details

Hardshell Hyperbaric Chamber

A hard-shell chamber for buyers comparing a rigid horizontal format with adjustable pressure and an integrated control arrangement. Confirm the selected diameter, full system scope, entry arrangement, and site load on the model-specific quotation.

• FormatHard-shell chamber
• Listed shell materialAviation-grade aluminum alloy
• Listed pressure range1.3–2.0 ATA, adjustable
• Listed size2200 mm length × 750–900 mm diameter (about 86.6 in. × 29.5–35.4 in.)
• Listed oxygen arrangementPSA concentrator with mask or ear hooks
• Listed controls10.1-inch PLC dual-control system
• Listed noiseNo more than 45 dB

Image-to-page check: The supplied image appears to show a walk-in chamber with two seats, which does not clearly match the listed 750–900 mm diameter product. Confirm the exact model and image pairing on the quotation.

Request a Model-Specific Hard-Shell QuoteView Product Details

1.5 ATA Hyperbaric Chamber for Sale

A horizontal hard-shell option for a single-user configuration with an all-in-one support system listed on the product page. Confirm the selected pressure version, site access, power, and included accessories in the final quote.

• FormatHorizontal hard-shell chamber
• Listed size75 cm diameter × 220 cm length (about 29.5 × 86.6 in.)
• Listed working range1.0–1.5 ATA
• Listed optionUpgrade to 1.6 ATA
• Listed material304 stainless steel
• Listed weight150 kg (about 331 lb.)
• Listed systemAll-in-one air compressor/oxygen concentrator plus air conditioner

Quote This 1.5 ATA ChamberView Product Details

Compare the Complete Quote, Not a Chamber-Only Price

Compare quotations only after pressure, structure, occupancy, size, system components, documents, and delivery terms have been aligned. A chamber-only price cannot be compared directly with a package that includes compression, oxygen supply, cooling, controls, accessories, installation, and training.

Ask each supplier to identify these cost boundaries:

• Chamber body, door or zipper system, internal support, mattress, chair, or other furniture
• Air compressor, air treatment, oxygen supply or concentrator, cooling, controls, monitoring, communication, hoses, and safety accessories
• Standard accessories, initial consumables, recommended spare parts, and optional upgrades
• Export packaging, freight, insurance, duties, taxes, customs responsibilities, and delivery to the final room
• Installation, commissioning, acceptance testing, operator training, maintenance training, and travel costs
• Warranty start date, covered parts, labor, freight, response terms, maintenance schedule, and post-warranty support

The quotation should state the currency, issue date, validity period, equipment status, delivery location, trade or shipping terms, and exclusions. This makes the purchase price and the installed project cost visible as separate figures.

Verify the Exact Device, Supplier, and Target-Market Documents

Shanghai Baobang Medical Equipment Co., Ltd. develops and produces MACY-PAN soft-sided and hard-shell hyperbaric chambers in Shanghai, China. The product range includes single-person and multi-person formats. Confirm that the legal manufacturer, brand, contract party, payment recipient, manufacturing location, and service provider are identified consistently in the transaction documents.

For every shortlisted chamber, match the complete model and configuration across the quotation, device label, specification, instructions, test records, warranty, and shipping documents. A certificate or regulatory record is useful only when its holder, address, scope, model coverage, manufacturing location, issue date, expiration date, and current status correspond to the device being purchased.

If the chamber will be purchased for medical use in the United States, verify the exact manufacturer and device in the FDA database, including the applicable product code, 510(k) record when required, intended use, and current recall information. Establishment registration, device listing, a certificate logo, or a record for a similar model does not substitute for model-specific US market authorization.

Request this document set before final approval:

• Dated quotation and configuration list with manufacturer, brand, complete model, submodel, quantity, and equipment status
• Model-specific specification, labeling, instructions for use, installation conditions, maintenance plan, and safety information
• Applicable regulatory records, standards, certificates, and supporting scope details for the target market
• Factory test or inspection records that will identify the delivered serial number or batch
• Packing list, commercial invoice, origin or other agreed export documents, and assigned import responsibilities
• Installation, commissioning, acceptance, training, warranty, spare-parts, and service responsibilities

Plan Delivery, Installation, and Acceptance Before the Order

Map the complete route from the unloading point to the operating position. Record doorway and elevator dimensions, corridor width, turns, thresholds, stairs, floor loading, lifting method, and the service clearance around the equipment. Use the packed dimensions and weight for logistics planning and the installed dimensions and weight for room planning.

Confirm voltage, frequency, phase, rated load, starting load, connection type, grounding, circuit protection, ventilation, environmental limits, fire controls, alarm audibility, communication, and emergency access. The electrical and site requirements on the final model documents should control the installation plan.

Define the handoff sequence in the purchase documents:

1. Approve the final specification, drawings, configuration, documents, and responsibilities.
2. Confirm factory inspection, release records, export packing, shipping terms, insurance, and import roles.
3. Inspect packaging condition, shipment count, labels, model, serial number, accessories, and visible damage on arrival.
4. Complete installation and model-specific checks for pressure, relief, ventilation, gas supply, controls, alarms, communication, and emergency functions.
5. Record training, acceptance results, open items, warranty start date, maintenance schedule, and service contacts.

Do not move a chamber into operation with unresolved shipping damage, missing identity documents, configuration differences, failed checks, or incomplete installation records. Record each issue and its resolution in the acceptance file.

Call MACY-PAN Send Requirements on WhatsApp Email Your RFQ