Sitting Hyperbaric Chamber Global Supplier - Direct Sale

This Sitting Hyperbaric Chamber has a vertical ergonomic design that provides stable treatment pressures from 1.3 ATA to 1.5 ATA. Compared with the traditional horizontal cabin, its floor area is reduced by 40% (only 1.5m ²), and it is equipped with L-shaped large-size zipper door, which supports zero-barrier access. It perfectly solves the use problems of elderly patients and people with mobility difficulties. It is an ideal choice for clinics and rehabilitation centers and has large-scale supply capacity.

1.3 – 1.5 ATA

Working pressure

93% ± 3%

Oxygen purity

environmental protection TPU composite material

Cabin material

Get a Quote

Sitting Hyperbaric Chamber features

save floor space

Adopting upright cylindrical structure design, the bottom diameter is only 130cm, and the total floor area is controlled within 1.5m. Compared with the horizontal oxygen chamber at the same level, it can save about 40% of the floor space for clinics or families, significantly improve the ping efficiency per unit area, and is suitable for the deployment of rehabilitation centers with limited space.

Barrier-free Access Design

Designed for groups with limited mobility, it is equipped with YKK customized L-shaped two-way zipper with an opening width of 80cm. Users can easily step into the cabin without bending or crawling, and support the placement of standard-sized wheelchairs or folding chairs, which greatly reduces the risk of falls for the elderly and postoperative rehabilitation patients.

Medical grade composite materials without gas release

The main body of the cabin is made of medical grade TPU composite material, and the high frequency heat welding technology is used to replace the traditional glue bonding. After testing, the tensile strength of the weld exceeds 500N, and there is no release of volatile gases such as formaldehyde, ensuring that there is no leakage after 5000 hours of continuous operation under 1.5 ATA pressure.

intelligent voltage stabilizing system

Dual Relief Valves are built in to automatically open the exhaust when the cabin pressure reaches the preset 1.5 ATA (7.5 psi), and control the pressure fluctuation within the range of 0.01 ATA. With the emergency manual pressure relief valve, it can be safely reduced to normal pressure within 45 seconds to ensure absolute safety.

Ultra-quiet operating environment

The oxygen generator and air compressor adopt suspension damping technology, combined with multi-layer sound insulation cotton wrapping, and the operating noise of the whole machine is strictly controlled at ≤ 50dB. The cabin is equipped with a silencer, which effectively eliminates the hiss of airflow, allowing users to read quietly, use a tablet computer or conduct business meetings during oxygen therapy.

Panoramic visual window improves treatment compliance

Two curved TPU transparent windows are arranged in the upper and middle parts of the cabin, and the light transmittance is as high as 95%. This not only facilitates external medical staff to observe the patient’s state in real time, but also effectively eliminates the claustrophobia of patients in a closed space and improves treatment compliance.

Sitting Hyperbaric Chamber Detailed parameter table

Parameter Category	Technical Specifications	Notes
Product Name	Sitting Hyperbaric Chamber (Vertical Type)	Seated/Standing Design
Pressure Level	1.3 ATA / 1.4 ATA / 1.5 ATA (Adjustable)	Adjustable pressure range
Oxygen Purity	93% ± 3% (at 10L/min flow)	Medical-grade oxygen production standards
Chamber Dimensions	Φ140cm (Bottom) x 160cm (Height)	Size can be customized
Material	Medical Grade TPU (Thermoplastic Polyurethane)	Environmentally friendly, non-toxic, and highly durable
Zipper Type	YKK Dual-layer Sealing Zipper	Regular lubrication and maintenance are required.
Air Flow Rate	70L/min – 120L/min	Rapid inflation and ventilation
Noise Level	≤ 50 dB	Laboratory test data
Power Consumption	600W (Compressor + Concentrator)	Energy-saving design
Standard Accessories	Folding Chair, Oxygen Headset, Mattress	Standard accessories
Certifications	CE, ISO13485, RoHS	Meets export standards

Sitting Hyperbaric Chamber contrast point

This Sitting Hyperbaric Chamber has been revolutionized by the pain points of traditional soft horizontal oxygen chambers, such as large waste of space and difficult access. By changing the pressure structure, we have achieved the premise of maintaining the same treatment pressure (1.5 ATA), allowing users to receive treatment in a natural sitting position, which has irreplaceable advantages for commercial operations and specific patient groups.

Solve the pain point of “difficulty in entering the cabin”

For the crowd: joint stiffness of the elderly, spinal injury patients, postoperative rehabilitation. Pain point solution: the traditional horizontal cabin requires the user to “climb” into the narrow entrance, the knee and lumbar spine pressure is great. This product uses a vertical side door design, the user can enter the car like sitting in the cabin, completely eliminating the physical activity is limited and can not use the oxygen chamber independent embarrassment and risk.

Solve the “boring and claustrophobic” pain points

For the crowd: business people, hyperactive children, claustrophobic patients. Pain point solution: the horizontal cabin has limited vision and cannot carry out productivity activities. The Sitting Hyperbaric Chamber allows the user to maintain a sitting position, and the cabin space is sufficient to accommodate a desk board. Users can use a laptop to work, read or watch their phone during 60-90 minutes of oxygen therapy, converting treatment time into effective time.

Solve the pain point of “field floor effect”

For the crowd: community clinics, beauty spa clubs, physical therapy centers. Pain point solution: a standard horizontal oxygen chamber plus ancillary equipment usually occupies a long strip of space of about 3m x 1.5m. This sitting oxygen chamber uses vertical space and only needs about 1.5m x 1.5m to fit in the corner. This enables the agent’s customers to directly increase their reception capacity by 50%-80% by increasing the number of equipment in the same room.

Sitting Hyperbaric Chamber Applicable Crowd

Physical Rehabilitation Center and Sports Medicine Clinic

Applicable target: athletes and postoperative patients who need to accelerate muscle recovery. Description: The 1.5 ATA stress environment provided by the Sitting Hyperbaric Chamber can significantly increase the blood oxygen partial pressure, accelerate lactate metabolism and repair of minor wounds. The sitting design is convenient for athletes with leg injuries to enter with protective gear. It is a high-frequency procurement equipment for professional sports teams and orthopedic clinics.

Sitting Hyperbaric Chamber Applicable Crowd

Anti-aging center and high-end SPA club

Applicable target: the pursuit of skin management and systemic anti-aging high net worth customers. Description: Hyperbaric oxygen therapy helps promote collagen synthesis and cell regeneration. The vertical cabin occupies a small area and has a modern appearance, which can easily be integrated into the decoration style of high-end beauty salons. Customers can perform systemic oxygen therapy while doing facial care to increase the unit price of service customers.

Old-age care institutions and day care centers

Target: Elderly population with chronic ischemic disease or cognitive impairment. Description: In view of the slow-moving characteristics of the elderly, the zero threshold design of this product is essential. Regular oxygen therapy can help improve brain microcirculation and relieve insomnia and cognitive decline. The simple operation process reduces the work intensity of nursing staff and is suitable for large-scale laying in the pension community.

Enterprise Employee Health Lounge

Applicable target: enterprise executives and IT R & D personnel facing high pressure and brain fatigue. Description: For “brain fog” and chronic fatigue syndrome due to long-term overtime. Enterprises can deploy this cabin in the rest area, and employees can use the lunch break for 45 minutes of micro-high pressure oxygen inhalation, which can quickly restore energy. The sitting posture design supports the office in the cabin, which conforms to the dual pursuit of efficiency and health of modern enterprises.

Sitting Hyperbaric Chamber life and after-sales service segment

Pre-sales and after-sales service

We provide agents with a 12-month free warranty (including compressors and oxygen generators). The after-sales team provides 24/7 online technical support and promises to issue replacement parts (such as valves and pipelines) within 24 hours after receiving the failure report. Provide detailed installation video and multilingual user manual.

Expected useful life

Based on the aging test data of TPU material, the design service life of the cabin is 5-7 years under standard room temperature environment and standard operation. It is recommended to check or replace the sealing ring every 5000 hours of operation of the air compressor to ensure the stability of the pressure output.

factory and certificate

certificate

FAQ And Contact Us

Welcome to our Frequently Asked Questions page. We have compiled answers to common questions you may have, hoping to provide you with clear and quick solutions. If you cannot find the information you need here, please feel free to contact our customer support team.

FAQ

Does the Sitting Hyperbaric Chamber support single-person independent operation?

Yes, this is one of our core design strengths. Both inside and outside the cabin are equipped with two-way pressure gauges and two-way zippers. After entering the cabin, the user can easily zip up the zipper from the inside and turn on the pressure switch, and the entire treatment process can be completed without the assistance of external personnel, which is very suitable for private use at home.

Is it safe to use electronic equipment under 1.5 ATA pressure?

Electronic devices such as mobile phones and tablets are generally safe to use in ATA -1.5 soft oxygen chambers. Although the pressure will increase slightly, as long as it is not in a pure oxygen environment (this compartment uses a mask for oxygen inhalation, and the compartment uses compressed air), there is no fire risk for the electronic equipment. It is recommended to avoid large devices that carry fragile screens.

Is there any difference between the treatment effect of vertical sitting oxygen chamber and horizontal oxygen chamber?

Under the same pressure (such as 1.3 or 1.5 ATA) and oxygen concentration, the physiological treatment effect of the two is theoretically consistent. The main difference is in position comfort.

Is the product complicated to install? Do you need a professional engineer?

This product adopts modular design, no need for professional engineers. It usually takes only 2 adults to complete the assembly in 20-30 minutes. We provide detailed step-by-step instructions and installation videos. The main steps only include connecting the air pipe, power cord and installing the support frame.

How to control the temperature in the cabin? Will it be very hot in summer?

When compressed air enters the cabin, it generates physical heat. To this end, our system comes standard with an air cooler, connected between the compressor and the cabin, which can reduce the temperature of the air entering the cabin by 3-5°C. With the air conditioning fan in the cabin, it can keep comfortable and cool even in summer.

Does this TPU material have peculiar smell?

We use RoHS certified medical grade environmentally friendly TPU material, and no glue is used in the production process (using heat-closing process). When the new machine is out of the box, there may be a very slight material smell. It is recommended to run idling in a ventilated place for 1-2 hours, and the smell can be completely dispersed, which is harmless to the human body.

Please feel free to contact us. We look forward to hearing from you.

Sitting Hyperbaric Chamber Global Supplier - Direct Sale

This Sitting Hyperbaric Chamber has a vertical ergonomic design that provides stable treatment pressures from 1.3 ATA to 1.5 ATA. Compared with the traditional horizontal cabin, its floor area is reduced by 40% (only 1.5m ²), and it is equipped with L-shaped large-size zipper door, which supports zero-barrier access. It perfectly solves the use problems of elderly patients and people with mobility difficulties. It is an ideal choice for clinics and rehabilitation centers and has large-scale supply capacity.

Working pressure

1.3 – 1.5 ATA

Oxygen purity

93% ± 3%

Cabin material

environmental protection TPU composite material

Get a Quote

Sitting Hyperbaric Chamber features

save floor space

Adopting upright cylindrical structure design, the bottom diameter is only 130cm, and the total floor area is controlled within 1.5m. Compared with the horizontal oxygen chamber at the same level, it can save about 40% of the floor space for clinics or families, significantly improve the ping efficiency per unit area, and is suitable for the deployment of rehabilitation centers with limited space.

Barrier-free Access Design

Designed for groups with limited mobility, it is equipped with YKK customized L-shaped two-way zipper with an opening width of 80cm. Users can easily step into the cabin without bending or crawling, and support the placement of standard-sized wheelchairs or folding chairs, which greatly reduces the risk of falls for the elderly and postoperative rehabilitation patients.

Medical grade composite materials without gas release

The main body of the cabin is made of medical grade TPU composite material, and the high frequency heat welding technology is used to replace the traditional glue bonding. After testing, the tensile strength of the weld exceeds 500N, and there is no release of volatile gases such as formaldehyde, ensuring that there is no leakage after 5000 hours of continuous operation under 1.5 ATA pressure.

intelligent voltage stabilizing system

Dual Relief Valves are built in to automatically open the exhaust when the cabin pressure reaches the preset 1.5 ATA (7.5 psi), and control the pressure fluctuation within the range of 0.01 ATA. With the emergency manual pressure relief valve, it can be safely reduced to normal pressure within 45 seconds to ensure absolute safety.

Ultra-quiet operating environment

The oxygen generator and air compressor adopt suspension damping technology, combined with multi-layer sound insulation cotton wrapping, and the operating noise of the whole machine is strictly controlled at ≤ 50dB. The cabin is equipped with a silencer, which effectively eliminates the hiss of airflow, allowing users to read quietly, use a tablet computer or conduct business meetings during oxygen therapy.

Panoramic visual window improves treatment compliance

Two curved TPU transparent windows are arranged in the upper and middle parts of the cabin, and the light transmittance is as high as 95%. This not only facilitates external medical staff to observe the patient’s state in real time, but also effectively eliminates the claustrophobia of patients in a closed space and improves treatment compliance.

Sitting Hyperbaric Chamber Detailed parameter table

Parameter Category	Technical Specifications	Notes
Product Name	Sitting Hyperbaric Chamber (Vertical Type)	Seated/Standing Design
Pressure Level	1.3 ATA / 1.4 ATA / 1.5 ATA (Adjustable)	Adjustable pressure range
Oxygen Purity	93% ± 3% (at 10L/min flow)	Medical-grade oxygen production standards
Chamber Dimensions	Φ140cm (Bottom) x 160cm (Height)	Size can be customized
Material	Medical Grade TPU (Thermoplastic Polyurethane)	Environmentally friendly, non-toxic, and highly durable
Zipper Type	YKK Dual-layer Sealing Zipper	Regular lubrication and maintenance are required.
Air Flow Rate	70L/min – 120L/min	Rapid inflation and ventilation
Noise Level	≤ 50 dB	Laboratory test data
Power Consumption	600W (Compressor + Concentrator)	Energy-saving design
Standard Accessories	Folding Chair, Oxygen Headset, Mattress	Standard accessories
Certifications	CE, ISO13485, RoHS	Meets export standards

Sitting Hyperbaric Chamber contrast point

Solve the pain point of “difficulty in entering the cabin”

For the crowd: joint stiffness of the elderly, spinal injury patients, postoperative rehabilitation. Pain point solution: the traditional horizontal cabin requires the user to “climb” into the narrow entrance, the knee and lumbar spine pressure is great. This product uses a vertical side door design, the user can enter the car like sitting in the cabin, completely eliminating the physical activity is limited and can not use the oxygen chamber independent embarrassment and risk.

Solve the “boring and claustrophobic” pain points

For the crowd: business people, hyperactive children, claustrophobic patients. Pain point solution: the horizontal cabin has limited vision and cannot carry out productivity activities. The Sitting Hyperbaric Chamber allows the user to maintain a sitting position, and the cabin space is sufficient to accommodate a desk board. Users can use a laptop to work, read or watch their phone during 60-90 minutes of oxygen therapy, converting treatment time into effective time.

Solve the pain point of “field floor effect”

For the crowd: community clinics, beauty spa clubs, physical therapy centers. Pain point solution: a standard horizontal oxygen chamber plus ancillary equipment usually occupies a long strip of space of about 3m x 1.5m. This sitting oxygen chamber uses vertical space and only needs about 1.5m x 1.5m to fit in the corner. This enables the agent’s customers to directly increase their reception capacity by 50%-80% by increasing the number of equipment in the same room.

Sitting Hyperbaric Chamber Applicable Crowd

Physical Rehabilitation Center and Sports Medicine Clinic

Applicable target: athletes and postoperative patients who need to accelerate muscle recovery. Description: The 1.5 ATA stress environment provided by the Sitting Hyperbaric Chamber can significantly increase the blood oxygen partial pressure, accelerate lactate metabolism and repair of minor wounds. The sitting design is convenient for athletes with leg injuries to enter with protective gear. It is a high-frequency procurement equipment for professional sports teams and orthopedic clinics.

Anti-aging center and high-end SPA club

Applicable target: the pursuit of skin management and systemic anti-aging high net worth customers. Description: Hyperbaric oxygen therapy helps promote collagen synthesis and cell regeneration. The vertical cabin occupies a small area and has a modern appearance, which can easily be integrated into the decoration style of high-end beauty salons. Customers can perform systemic oxygen therapy while doing facial care to increase the unit price of service customers.

Old-age care institutions and day care centers

Target: Elderly population with chronic ischemic disease or cognitive impairment. Description: In view of the slow-moving characteristics of the elderly, the zero threshold design of this product is essential. Regular oxygen therapy can help improve brain microcirculation and relieve insomnia and cognitive decline. The simple operation process reduces the work intensity of nursing staff and is suitable for large-scale laying in the pension community.

Enterprise Employee Health Lounge

Applicable target: enterprise executives and IT R & D personnel facing high pressure and brain fatigue. Description: For “brain fog” and chronic fatigue syndrome due to long-term overtime. Enterprises can deploy this cabin in the rest area, and employees can use the lunch break for 45 minutes of micro-high pressure oxygen inhalation, which can quickly restore energy. The sitting posture design supports the office in the cabin, which conforms to the dual pursuit of efficiency and health of modern enterprises.

Sitting Hyperbaric Chamber life and after-sales service segment

Pre-sales and after-sales service

Expected useful life

Know Us and Contact Us

Get a Free Quote Today.