전체 방송국 검색

Lying Type Hyperbaric Chamber: Dimensions And Access

뉴스 기사 1260

The rectangular high-pressure oxygen chamber (lying type hyperbaric chamber) is named after its main use position, and the user lies down along its long axis. The same is true of the rectangular, which can enter and exit via a zipper placed along the hull, and the hard module is also designed to carry the bed from the gate along the guidance tracks. The two structures are to be left vacant, one depending on the space by which the hatch is opened and the other on the trans-shipment route in front of the hatch. Newtown Class 4 Operational Manual — Technical material

AI-generated illustration of blue soft-shell and white hard-shell lying type hyperbaric chambers
AI-generated illustration based on MACY-PAN product images.

How Much Room Does the Hatch Diameter Tell You to Lie Down?

MACY-PAN’s catalogue of products lists ST801 and ST901 as a rectangular module, the size of which is indicated by diameter x length, 80 x 225 cm and 90 x 225 cm, respectively. This group of data indicates that the size of the ST901 module in the directory is 10 cm in diameter, with the same nominal length. When checking a specific configuration, you also need to look at the corresponding dimensions. For example, ST801 1.3 ATA specification pages of the same brand include a class size of 220 cm and a diameter of 80 cm. There is a difference of 5 cm between the sizes of the two materials, and the layout of the rooms should be based on the corresponding configurations. MACY-PAN Product Catalogue . ST801 1.3 ATA Specification and Size Chart

Even if the drawings are clearly marked with an inner diameter, it depends on the height at which the person lies. The convection is the widest in the centre line and the closer it is to the bottom or top, the shorter the distance between the walls on both sides of the same altitude. When comparing shoulder space, a mattress or slide bed determines the position of the body in the crosssection, the net width of the shoulder height behind the accompanying mattress should be checked. When checking the length, look at the net length actually available from the head to the foot end. The description of the module is a long range suitable for the initial screening, and the two net dimensions correspond directly to the space occupied by the person lying down.

Where’s the Entrance?

Zip open in the bedroom. Newtown Class 4 ‘ s handbook shows both the top and the side of the same cylinder module as the in and out. The contents are still horizontally placed and the position of the entrance has changed. When drawing, identify the net opening when the zipper is fully open and where the user approaches the entrance and turns around. If the side opening is close to the wall, there may not be sufficient access to the opening, even if the body of the module is present. Newtown Class 4 Operations Manual, page 15

The gate with the slider’s bedroom. Technical information from Presidential HA-34 and HA-38 describes an entry and exit route along the long axis of the module. Users first lay on the floor of the trans-shipment bed, and staff members aligned the panel with the inside track before pushing it into the cabin. When this type of module is set up, the main gate is to be opened, the trans-shipment bed is to be replaced with the space required to exit the panel. In particular, watch the front of the hatch, where the trans-shipment bed interface is located. Summary of the declaration by HA-34/HA-38

Check the Specifications With These Four Data.

Check items. What do you see in drawings or demonstrations?

  • lie down for a long period of time and then put up mattresses or slip beds, how long can you actually use from head to foot? If the specification only covers the total length of the module, the internal dimensions are supplemented.
  • The net width of the shoulder is measured at the actual lie-down height between the sides of the wall. In particular, the cylindrical module checks the measurement height.
  • (b) The net dimensions of the entrance to see the opening of the zipper once the zipper has been fully opened, or the dimensions of the gate when opened for passage through the panel, and to confirm the height of the entrance from the ground.
  • Outdoor operating space, mark the exit and exit routes on the floor plan. The side openings allow for proximity and turn-over positions, and the port-style check the scope of the activities of the doors, trans-shipment beds and slide beds.
이전:

관련 권장 사항

더 확장하세요!

미국 지사 창고 미국 현지 기술 지원
*
*

귀하의 국가

*
제출 중!
제출 성공!
제출하지 못했습니다!
이메일 주소가 잘못되었습니다!
전화번호가 잘못되었습니다!

나에게 딱 맞는 Hbot 챔버 찾기

미국 지사 창고 미국 현지 기술 지원

원하시는 사항을 알려주세요. 적합한 모델과 가격, 배송 옵션을 안내해 드리겠습니다.

*
*

배송지:

미국캐나다기타
제출 중!
제출 성공!
제출하지 못했습니다!
이메일 주소가 잘못되었습니다!
전화번호가 잘못되었습니다!

다음에서 닫힙니다. 0 초