HBOTSALE
Big Hyperbaric Chamber
- Format
- Selected hard-shell and seated range
- Occupancy
- Individual and multi-seat options
- 圧力
- HE5000 2.0 ATA reference; model-specific
- Order
- Configuration and destination quote
Big Hyperbaric Chamber
USD 40,414–78,650 / unit — configuration-dependent US market references; request your factory quote
Request a QuoteThis selected hard-shell range covers roomy individual and shared-seat big hyperbaric chamber options for different occupant counts, postures and pressure requirements, with exact product listings and configuration-specific quotations for home and facility installations. Facility installations depend on the chamber envelope, delivery route and room services alongside space for the compressor, oxygen concentrator and cooling equipment. A larger cabin is not necessarily multiplace; occupant positions and breathing arrangements remain distinct specifications.
Individual Space And Shared Seating
Product ListA roomier individual chamber and a multi-person chamber solve different space needs. A wider single-person cabin can make sitting or lying more comfortable, but it does not create an additional approved occupant position. For shared use, compare the actual seating arrangement and the intended occupant count rather than judging capacity from a photograph.
The HE5000 family includes two-seat, three-seat, bed and bench arrangements, while HE5000 Plus is described as a four-person option. The manufacturer's reference specifications identify 2.0 ATA hard-shell configurations; the quoted model, installed breathing system and operating instructions determine the delivered configuration. HP2202 is a separate lying hard-shell series, with a 220 cm (86.6 in) body length and 75, 85 or 90 cm (29.5, 33.5 or 35.4 in) diameter options.
Start a shortlist with intended occupants, sitting or lying posture, available room size and target operating pressure. The five links below include broader product pages and several HE5000 listings, so compare the exact offer on each detail page rather than assuming that every link is a different chamber design.
This featured hard-shell range is a selected part of the wider large-chamber market; it is not a catalog of hospital-scale multiplace rooms or every soft-chamber option.
Chamber Footprint And Site Services
Product ListThe body envelope is only the starting point for a facility layout. Leave space for entry, operator access and the auxiliary equipment, and check the complete delivery route before an order is confirmed.
- HE5000 reference envelope
- 2070 × 1616 × 1749 mm (81.5 × 63.6 × 68.9 in); reference body weight 650 kg (1433 lb).
- HE5000 Plus reference envelope
- 2506 × 1697 × 1741 mm (98.7 × 66.8 × 68.5 in); reference body weight 850 kg (1874 lb).
- Supporting equipment
- The HE5000 system includes an oxygen concentrator, air compressor and cooling system. Allocate their footprint and service clearance as well as the chamber itself.
The narrowest door, corridor turns, lift opening and unloading route constrain delivery. Floor loading, ventilation and electrical supply are assessed against the selected configuration drawings. The dimensions above describe manufacturer reference variants, not a universal installed footprint; final layout and utility requirements belong to the model-specific quote.
A wide entrance or a large cabin should not be treated as proof of wheelchair or stretcher compatibility. If assisted access is required, state that requirement and obtain the actual clear opening and seating or transfer arrangement before choosing a unit.
What Big Means In A Hyperbaric Chamber
Product ListBig can refer to cabin diameter, usable interior space or the number of occupants. These are separate specifications: an enlarged individual unit may still be single-place, while a multiplace chamber has defined positions for more than one person.
A hyperbaric chamber is a pressure-rated enclosure connected to the equipment needed for its operating configuration. Air pressurization and the oxygen supply or breathing arrangement must be checked for the selected system, not inferred from its size. Shared seating can change the session setting, but it does not establish a medical outcome or make a chamber suitable for every user.
For any treatment use, follow the appropriate clinical supervision, eligibility assessment and manufacturer operating instructions. This page compares equipment formats and purchasing considerations; it is not a treatment recommendation.
Featured Chamber Models
Large hard-shell chambers provide a rigid pressure enclosure in individual or shared-seat layouts. This featured range differs by occupant count, posture and model configuration; the exact detail-page offer identifies the supplied configuration.
ハードシェル高気圧チャンバー
Rigid chamber formats suit a dedicated indoor installation.
- Application / fitIndividual or shared layouts
- 圧力Model-specific pressure
- 素材Rigid metal shell
- SystemConfigured air/oxygen package
USD 40,414–49,770 / unit — HP2202 US list reference; model quote required
Request a Quote
高気圧室
A seated layout supports an upright session posture.
- Application / fitSeated indoor use
- 圧力Model-specific pressure
- 素材Model-specific shell
- SystemConfigured air/oxygen package
USD 39,999 / unit — HP750 US retail reference; seated-model quote required
Request a Quote
HE5000 2-3人用トラックカマー
HE5000 seating arrangements accommodate two or three occupants.
- Application / fit2–3-person HE5000
- 圧力2.0 ATA reference
- 素材Stainless steel
- SystemConcentrator/compressor/cooling
Two-or-three-seat listing budget: USD 63,400–78,650 / unit — HE5000 variant US retail reference; quote required
Request a Quote
He5000 2-3人用トラック・ハンマー
This HE5000 listing presents its offered seating and finish.
- Application / fit2–3-person HE5000
- 圧力2.0 ATA reference
- 素材Stainless steel
- SystemConcentrator/compressor/cooling
Alternative HE5000 listing budget: USD 63,400–78,650 / unit — HE5000 variant US retail reference; quote required
Request a QuoteHe5000ハイパーバスケット3人乗り2台
A three-person HE5000 configuration combines shared seating and a rigid shell.
- Application / fit3-person HE5000
- 圧力2.0 ATA
- 素材Stainless steel
- SystemConcentrator/compressor/cooling
Three-person configuration budget: USD 63,400–78,650 / unit — HE5000 variant US retail reference; quote required
Request a QuoteOrdering And Delivery
Quotation comparisons are meaningful when model, equipment package and delivery basis match.
MOQ: one complete chamber. No free equipment sample is offered; evaluation uses the specified configuration, images and quotation. Pricing is per unit, with equipment and freight listed separately.
Ask for a multi-unit quote with the same model, accessories and destination so unit pricing is comparable. Packing and acceptance criteria are agreed before production.
Repeat orders use the confirmed bill of configuration. Price breaks and scheduling depend on the number of identical units and any finish or seating changes.
Configured units follow a made-to-order route, not an assumed immediate-stock sale. The accepted quote defines production and dispatch dates; shipping transit is additional.
Request delivery to the named country and postal code. The quote defines the destination, freight method, Incoterm and import responsibilities; local installation and regulatory requirements remain project-specific.
Shipment documentation covers the commercial invoice, packing list and model-specific operating instructions. The configuration drawing and acceptance checklist establish the equipment acceptance basis.
Discuss A Site Or Seating Configuration
Share a room plan, access dimensions or the seating layout you need. A configuration review can consider seating, finish and manufacturer-offered options; the accepted quote defines the supplied arrangement.
Before You Place An Order
Clarify the order basis, local requirements and service responsibilities.
Does the price on another seller's site apply here?
No. Public retail prices depend on the seller, included equipment, freight and service terms. The quotation issued for the selected configuration and destination is the order basis.
Can I assume this equipment is approved for my local clinical use?
No. Equipment selection and local permission are separate matters. Model documentation, applicable local requirements and intended use require review by the responsible facility or clinical team before an order.
What should I request for after-sales service?
Request the written warranty term, covered parts, remote support route, spare-parts availability and responsibility for freight or on-site labor. These terms should be part of the accepted quotation rather than inferred from a product image.
What happens if the chamber cannot enter the building?
Approval depends on the narrowest route and installation drawings. Final unloading and installation follow a site-team check of delivery dimensions and the access plan.
Can I send personal health information in this form?
Please do not submit medical records or sensitive health information here. This is an equipment inquiry form; any clinical suitability assessment should use the appropriate professional care channel.
Request A Chamber Configuration Quote
- 0086-180-1702-3916
- rachel@macypan.com
- 0086-180-1702-3916
- Bldg.15, 889 Guinan Rd, Songjiang Dist, Shanghai, China 201617