at home hyperbaric chamber for sale

Choose the Chamber Around the User, Room, and Intended Use

A home hyperbaric chamber should match a defined use case before pressure or price is compared. Start with who will enter the chamber, whether the person must sit or lie down, whether an attendant or second user needs space, and who will monitor each session from outside.

Select the structure

• Portable TPU chamber: A flexible chamber can reduce chamber-body weight and may be folded for storage. The complete system still includes compression, oxygen, cooling, controls, hoses, and safety accessories, so its total storage and operating footprint must be measured.
• Hard-shell chamber: A rigid sitting or walk-in design provides a fixed interior layout and supports higher-pressure configurations in this product range. Its weight, doorway clearance, turning path, floor loading, and installation space require confirmation before ordering.

Match the position and capacity

• Choose a lying chamber when the user needs a full-length resting position and can transfer through the specified entrance.
• Choose a sitting chamber when an upright or reclined seat better fits the user and room.
• Choose a multi-person chamber only after confirming rated occupancy, seat layout, oxygen connections, supervision, and an emergency exit plan.

Define pressure in the same terms

Compare working pressure in ATA absolute, not an unlabeled psi or “atmospheres” figure. The listed options span 1.3 to 2.0 ATA, but a higher maximum pressure does not determine suitability by itself. Intended use, chamber structure, breathing-gas arrangement, operating instructions, supervision, and U.S. regulatory status must support the same configuration.

For a U.S. purchase, ask for the legal manufacturer, complete model and sub-model, intended use, labeling, instructions for use, and the applicable FDA record. “Home,” “personal,” and “for sale” describe the sales context; they do not establish prescription status, clearance, or permission for unsupervised operation.

Confirm the Room Before You Confirm the Model

Measure the complete delivery and operating path. Record the narrowest door, hallway, stair, elevator, and turning clearance from the unloading point to the final room. For a rigid chamber, obtain the packed and installed dimensions and weight before confirming that the floor and route can accept it.

The operating room must hold the chamber and every external component while preserving access to controls, air inlets, exhaust, electrical connections, emergency controls, and maintenance panels. Add the manufacturer’s required clearance instead of using the chamber dimensions as the total room footprint.

Home site checklist

• Floor and access: Confirm floor loading, level placement, doorway clearance, elevator capacity, and a clear emergency path.
• Power: Match voltage, frequency, circuit capacity, plug, grounding, and any backup-power requirement to the exact system. The listed products include 110/220 V configurations, but the final electrical schedule belongs in the written order.
• Air and temperature: Maintain the ventilation, temperature, humidity, and dust limits stated for the model. Allow heat from the compressor, oxygen equipment, and cooling system to leave the room.
• Fire safety: Plan the room around the fire-protection, electrical, grounding, clearance, and emergency-access requirements for the exact chamber and oxygen arrangement.
• Monitoring and communication: Provide an outside operating position with a clear view of the user, audible alarms, communication, and immediate access to emergency controls.
• Service space: Leave room for inspection, cleaning, filter changes, hose replacement, and removal of external equipment without blocking the exit route.

Send room photographs and a dimensioned route sketch with the inquiry. A rigid multi-person chamber may require a different delivery method from a flexible single-person system even when both fit inside the final room.

Home Hyperbaric Chambers Available from MACY-PAN

Blue flexible horizontal chamber on a white and light-gray background, clearly labeled “MACY-PAN 701 hyperbaric O₂ chamber”; no people.

HB-HOME-S1500 Home Hyperbaric Chamber

This flexible TPU home system offers selectable 1.3 or 1.5 ATA pressure and a full-length interior for lying use. Inside and outside touch controls operate the pressure and timing functions, while the listed cooling and drying equipment supports room-based operation. The supplied image is labeled “MACY-PAN 701 hyperbaric O₂ chamber,” while this card uses the HB-HOME-S1500 name stated on the designated product page. Confirm the image, complete model, and specifications together in the written quote.

• Presión nominal1.3 ATA or 1.5 ATA
• Concentración de oxígeno93% ± 3% from the listed PSA system
• Internal chamber length2,250 mm / 88.6 in
• Published chamber diameter range80–90 cm / 31.5–35.4 in
• Chamber materialHigh-strength TPU composite
• Flujo de aireAt least 85 L/min
• ControlsTouch screens inside and outside the chamber
• Safety configurationThree independent pressure-relief paths

Quote This ModelView HB-HOME-S1500 Details

White and light-gray rigid chamber on a white background, with a large transparent window and door on the left showing a warm orange interior and bench, plus a blue display at the upper right; no people.

HE5000 Hyperbaric Chamber for 2–3 People

This rigid multi-person HE5000 configuration provides a large shared interior for two to three people. The designated product page lists adjustable pressure up to 2.0 ATA, a 160 cm chamber diameter, climate control, internal seating, communication, and 110/220 V power options.

• Presión máxima de servicio2.0 ATA, adjustable
• Capacidad nominal2–3 people
• Chamber dimensions160 cm diameter × 220 cm length / 63.0 × 86.6 in
• Published oxygen concentration93% ± 3%
• Flujo de aire120 L/min
• Power supply110/220 V, 50/60 Hz
• Published total power2,500 W
• InteriorSeating, LED lighting, intercom, and air conditioning

Quote This ModelView HE5000 2–3 Person Details

Front-right view of a white and light-gray HE5000 Fort chamber with a single central transparent door, a blue touchscreen on the right, and HE5000 Fort branding on the body; white background with no people.

HE5000 Fort 1–2 Person Sitting Hyperbaric Chamber

The HE5000 Fort is a rigid sitting chamber for one or two users. Its product package lists the chamber cabin, oxygen generation, enhanced air compression, and air conditioning, with touchscreen controls and internal and external pressure-relief operation.

• Maximum pressure2.0 ATA, adjustable
• Capacidad1-2 personas
• External size89 × 46 × 74 in / 2,261 × 1,168 × 1,880 mm
• Published oxygen concentration90%+
• Included on the product pageChamber cabin, two 10 L oxygen concentrators, enhanced air compressor, and air conditioner
• ControlsTouchscreen system with pressure and session information
• Safety functions listedDoor-close sensing, manual and automatic pressure relief, emergency relief, power-outage alarm, and internal/external pressure displays

Quote This ModelView HE5000 Fort Details

Front-right view of a white and light-gray rigid sitting chamber with a central transparent door, a blue touchscreen on the right, and “MACY-PAN HE5000 Fort hyperbaric O₂ chamber” printed on the body; white background with no people.

High-Efficiency Home Hyperbaric Chamber System

This product listing covers two different builds: a horizontal hard-shell chamber and a seated soft-shell chamber for one or two users. The hard-shell build requires a verified delivery route and floor loading; the soft-shell build still needs space for compression, oxygen, cooling, controls, and hoses. The written quote must name one complete sub-model and its corresponding specifications.

• Structure choicesHorizontal hard shell or seated soft shell
• Listed working-pressure range across the page1.5–2.0 ATA; confirm the selected sub-model's rated pressure
• Listed capacity across the page1–2 people; confirm the selected sub-model's rated occupancy
• Oxygen generationPSA molecular-sieve system
• Power110/220 V
• Published lead time for standard configurations7–15 business days

Define and Quote This SystemView Configurable System Details

Compare the Four Listed Options

*Published web prices were checked on October 9, 2026. They are reference listing prices, not installed prices or guaranteed current offers. The written quote must identify the exact model, equipment package, destination, shipping, taxes, installation, and validity period.

Use the table to shortlist equipment; establish operating settings from the selected device instructions and qualified professional direction.

Compare Price Only After the Configuration Matches

A chamber-only price cannot be compared directly with a complete-system or installed price. Ask each quote to separate the chamber, compressor, oxygen concentrator or supply interface, cooling and drying equipment, controls, communication equipment, furniture, hoses, safety accessories, starter consumables, and spare parts.

Costs that can change the delivered total

• Pressure rating, chamber structure, diameter, occupancy, seat or bed layout, and entrance design
• Oxygen generation, airflow, cooling, dehumidification, controls, communication, and optional interior equipment
• Crating, freight, insurance, customs entry, duty, tax, residential delivery, indoor handling, and rigging
• Site preparation, electrical work, ventilation, installation, commissioning, acceptance testing, and training
• Filters, cleaning supplies, preventive maintenance, inspections, replacement parts, remote support, and on-site service

Request the equipment price, delivered price, and installed price as separate totals. The quote should also identify its currency, issue date, expiration date, payment stages, shipping term, delivery location, and the party responsible for import and local compliance.

Put the Complete Buying Package in Writing

Shanghai Baobang Medical Equipment Co., Ltd. manufactures soft and hard MACY-PAN chambers for single- and multi-person configurations.

OEM and ODM options include color, branding, language, and selected controls or interior features. Lock each approved option to the complete model, signed drawing, and revision-controlled configuration list before production.

Send with your inquiry

• Intended use and U.S. destination
• Number of users, sitting or lying preference, mobility and transfer needs, and outside monitoring plan
• Requested working pressure and the professional or regulatory basis for that request
• Room dimensions, access-route measurements, floor information, voltage, frequency, ventilation, and photographs
• Required delivery date, indoor placement needs, installation expectations, and training language

Lock into the offer and order

• Legal manufacturer, brand, complete model and sub-model, equipment status, country of origin, and serial-number process
• Rated working pressure, maximum permitted pressure, relief settings, capacity, dimensions, weight, materials, power, airflow, and oxygen-system details
• Approved drawings, configuration revision, labeling, instructions, installation requirements, maintenance schedule, safety information, test records, and applicable U.S. regulatory documentation
• Acceptance criteria for identity, documentation, pressure, relief, ventilation, oxygen or gas supply, controls, alarms, communication, and emergency functions
• Warranty start date, term, covered parts, labor, travel, return shipping, exclusions, response method, spare-parts availability, and support after discontinuation

At delivery, match the nameplate, model, serial number, packing list, manuals, approved configuration, and test records before commissioning.

During commissioning, test each agreed acceptance item with the procedure and pass criteria for that model. Record the result, personnel, date, instrument where applicable, and resolution of any failed item before loaded operation.

Home Hyperbaric Chamber FAQ